Upvc Door Lock Replacements
You may need to change your upvc lock for a variety of reasons. It is possible to replace your door lock due to a variety of reasons, like the possibility of losing your key, or if the barrel is damaged.
It is crucial to have the replacement of your Upvc lock completed by a professional. This will ensure that the job is done to the highest standard and provides the security you require.
Lock Cylinder
The lock cylinder is the part of the lock that can be opened by keys. It is separated from the body of the lock (which includes the locking mechanisms) by a retaining screw. A standard cylinder is equipped with a pin tumbler system that is driven on one side by the key and on the other by the locking cam. This then actuates the bolt mechanism of the lock. The cylinder can be modified to alter the lock's key operation, design or level of security.
The Euro profile Cylinder is the most popular cylinder design that is used on uPVC door, but there are different versions like British standard or anti-snap. repairmywindowsanddoors.co.uk come with more sophisticated pin tumblers and additional components to help resist burglary methods such as lock bumping or snap guns.
To replace the cylinder, you'll need to take off the door handle first and then unscrew the retaining screw that keeps the cylinder in place from the inside of the door. After that you can take out the old cylinder and replace it with the new one. It can be difficult to replace older uPVC lock that are over 20 years old. However, the modern locks are made with stronger materials and are easier to install using the proper tools.
It is important to purchase the correct sized cylinder to fit your door. In the event that it is not, it will be difficult to install. The dimensions are measured from the center circular portion of the keyhole to the center of the square spindle. This measurement is known as the PZ dimension.
Insert the cylinder into the door lock, then turn the key to see if it is the correct size. If you're unable to turn the key with ease it's time to buy another replacement.
A few people choose to have their uPVC doors with cylinder locks replaced following an incident in which the locks were damaged. Others may simply desire to increase the security of their business or home. In certain situations changing your locks could be a legal necessity.
Lock Handle
The barrel of the lock on a upvc door is one of the most simple jobs a locksmith can do. It can be completed in a matter of minutes. There are many reasons to want to change the locks. Your tenants might have left without returning keys. You might have lost the key.
You'll need to remove the handle and cylinder from the door in order to access the screw hole on the back plate. It's simple to do this using a screwdriver, but it is important to be cautious not to scratch the handle or the cylinder. Once you have removed the handle and cylinder you'll need to take measurements of the upvc lock mechanism to determine if you want to purchase the cylinder. The PZ and Backset are the two most important measurements.
If you are able to determine the manufacturer of your upvc lock mechanism then it is recommended to make a new cylinder with the existing one. The easiest method to do this is to look at the faceplate made of metal of the lock. If there is a name engraved on it, then that would be your brand. The shape of the gearbox could provide a good indication of the brand.
There are a variety of kinds of Upvc locks, including euro cylinder and anti-snap cylinder locks. They look alike, but they differ in certain ways that impact their security. The euro cylinder lock with anti-snap is more difficult to open than regular euro cylinder locks.
If you are familiar with using screwdrivers, you can purchase the upvc parts and complete the job yourself. However it is recommended you leave the job to professionals. They will be able provide you with the proper parts and complete the job quickly and to a very high standard. A professional will be able to repair any damage that might be caused by the procedure.
Fixing Plates
The latch could be a problem on upvc doors if it is not aligned with the strike plate. This can cause the door to bind or fail to close. This is usually due to the strike plate not being correctly aligned with the frame. To fix the issue you can move the strikeplate either up or down until the frame is properly aligned. Alternately tightening the hinges may aid. But, it's important not to over tighten them because this could cause damage to the screws.
It is not as hard as you may think to locate replacement handles for upvc doors. There are a variety of types of handles on the internet. The handle you select must match the cylinder and keyhole that are present on your door made of upvc. You can determine this by measuring the distance between the keyhole and the cylinder's center, as well as your handle spindle. It is also important to ensure that the spring cassette is compatible.
Another way to upgrade your doors made of upvc is to install a new lock mechanism. There are several options available, from locks that are made for use in the home to ones that are suitable for commercial use. A lot of locks are designed to withstand corrosive conditions and come with a variety of features.
If you're in search of an upvc door handle replacement or an entirely new lock, Fab and Fix has the items you require. They offer a broad selection of handles in different styles and colors and are made with high-quality materials. They are also tested for a variety security standards. They are also simple to install. They are also cheap and provide excellent value for the money.
Gearbox
When a uPVC door lock fails, the problem tends to be limited to the gearbox, rather than the entire multipoint mechanism. This means that changing the gearbox could be an easier task than replacing the handle or barrel, and it's something anyone with a decent DIY skills is able to do without much difficulty.
The most important thing to do when replacing the uPVC gearbox is to use the correct tools and follow the correct procedure. If you've got a screwdriver that is suitable and a tape measure, the process is fairly easy and can be completed in less than an hour. It is important to check the description of the product before you begin. This will tell you the kind of gearbox that is suitable for your door.
Always make sure you're using a British Kite marked lock for your uPVC door, since these come with the most recent security features that protect against a variety of ways such as the latest phenomenon referred to as "lock snapping". This means that the UK government will test and confirm the lock as being high-security.
It is essential to prop the door open or secure it so that it does not close during the procedure. It is first necessary to loosen that long screw that holds the handle in place. Ensure that you keep this screw safe since it will need to be reattached later.
After removing the screw you can remove the handle and inspect the inside workings for the first time. Once the old cylinder is been removed, you will have to carefully insert the new cylinder, ensuring that it is in perfect alignment with the barrel of your lock. Once you are happy that everything is in place you can screw the long screw back into place and then attach the handle in its original position.
The most frequent reason for a uPVC door handle not lifting up to lock is a lack of lubrication, however in some instances the problem can be due to a complete mechanism malfunction. If you suspect that this is the case, it's recommended to contact a locksmith out for the job.